I got an Outlander rear motor P/N F1E1A2B5Z for a good price. It is liquid cooled 10 pole IPM motor. It comes with resolver and 7:1 reducer and differential drive. It will be my test bed for setting up both sides of Ampera inverter to get 1000Arms.
First I connected it to my VW 360Vdc battery and tried to run it with Johannes drive.
I needed to setup resolver wires.
Resolver is also 10 pole same as the motor
Then i used Volt inverter to connect three phases and my car simulator
Here is my setup after syncoffset run to determine the offset of resolver.